|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT, APGT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
|
4 FLUTE EXTENDED REACH with CORNER RADIUS (EIB06)
|
|
|
|
|
|
|
|
 4 FLUTE EXTENDED REACH with CORNER RADIUS (EIB06) |
| Corner Radius |
Mill Diameter |
Shank Diameter |
Length of Cut |
Length Below Shank |
Overall Length |
Neck Diameter |
EDP |
| R |
D1 |
D2 |
L1 |
L3 |
L2 |
D3 |
|
| R.005 | 1/32 | 1/8 | 3/32 | 3/8 | 3 | 0.028 | EIB06002 |
| R.005 | 1/32 | 1/8 | 3/32 | 1/2 | 3 | 0.028 | EIB06901 |
| R.010 | 3/64 | 1/8 | 9/64 | 9/16 | 3 | 0.043 | EIB06003 |
| R.010 | 3/64 | 1/8 | 9/64 | 3/4 | 3 | 0.043 | EIB06902 |
| R.010 | 1/16 | 1/8 | 3/16 | 3/4 | 3 | 0.057 | EIB06004 |
| R.010 | 1/16 | 1/8 | 3/16 | 1 | 3 | 0.057 | EIB06903 |
| R.010 | 3/32 | 1/8 | 9/32 | 1 | 3 | 0.086 | EIB06006 |
| R.010 | 3/32 | 1/8 | 9/32 | 1-1/2 | 3 | 0.086 | EIB06904 |
| R.010 | 1/8 | 1/8 | 3/8 | 1-1/2 | 3 | 0.115 | EIB06008 |
| R.010 | 1/8 | 1/8 | 3/8 | 2 | 3 | 0.115 | EIB06905 |
| R.015 | 1/8 | 1/8 | 3/16 | .8" | 2-1/2 | 0.115 | EIB06906 |
| R.020 | 3/8 | 3/8 | 3/8 | 3 | 6 | 0.355 | EIB06907 |
|
|
 |
|
