|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT, APGT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
|
DUAL CONTACT HYDRAULIC CHUCK (SLIM) CBT
|
|
|
|
|
|
|
|
 DUAL CONTACT HYDRAULIC CHUCK (SLIM) CBT |
| MODEL No. |
TAPER NO. |
d1 |
D1 |
D2 |
L |
L1 |
L2 |
G |
EDP NO. |
| CBT30-HC1/4-2.76 | 30 | 0.250 | 1.024 | 1.752 | 2.760 | 1.161 | 1.063 | M5x0.8mm | WD020 |
| CBT30-HC5/16-2.76 | | 0.313 | 1.102 | 1.752 | 2.760 | 1.181 | 1.063 | M6x1.0mm | WD022 |
| CBT30-HC3/8-2.95 | | 0.375 | 1.181 | 1.752 | 2.950 | 1.220 | 1.260 | M8x1.0mm | WD024 |
| CBT30-HC1/2-3.35 | | 0.500 | 1.260 | 1.752 | 3.350 | 1.575 | 1.457 | M10x1.0mm | WD026 |
| CBT30-HC5/8-3.54 | | 0.625 | 1.496 | 1.752 | 3.540 | 1.811 | 1.654 | M12x1.0mm | WD028 |
| CBT30-HC3/4-3.54 | | 0.750 | 1.654 | 1.752 | 3.540 | 1.890 | 1.654 | M16x1.0mm | WD030 |
| CBT40-HC1/4-3.54 | 40 | 0.250 | 1.024 | 1.772 | 3.540 | 1.713 | 1.063 | M5x0.8mm | WE020 |
| CBT40-HC5/16-3.54 | | 0.313 | 1.102 | 1.772 | 3.540 | 1.713 | 1.063 | M6x1.0mm | WE022 |
| CBT40-HC3/8-3.54 | | 0.375 | 1.181 | 1.772 | 3.540 | 1.752 | 1.260 | M8x1.0mm | WE024 |
| CBT40-HC1/2-3.54 | | 0.500 | 1.260 | 1.772 | 3.540 | 1.752 | 1.457 | M10x1.0mm | WE026 |
| CBT40-HC5/8-3.54 | | 0.625 | 1.496 | 1.772 | 3.540 | 1.870 | 1.654 | M10x1.0mm | WE028 |
| CBT40-HC3/4-3.54 | | 0.750 | 1.654 | 1.772 | 3.540 | 1.870 | 1.654 | M10x1.0mm | WE030 |
| CBT40-HC1"-3.94 | | 1.000 | 1.969 | 2.362 | 3.940 | 1.772 | 1.890 | M16x1.0mm | WE032 |
| CBT40-HC1 1/4-4.13 | | 1.250 | 2.362 | 2.362 | 4.130 | - | 2.165 | M16x1.0mm | WE034 |
| | | | | | | | | |
| MODEL No. | TAPER NO. | d1 | D1 | D2 | L | L1 | L2 | G | EDP NO. |
| CBT30-HC6-70 | 30 | 6 | 26 | 44.5 | 70 | 29.5 | 27 | M5x0.8mm | WD100 |
| CBT30-HC8-70 | | 8 | 28 | 44.5 | 70 | 30 | 27 | M6x1.0mm | WD102 |
| CBT30-HC10-75 | | 10 | 30 | 44.5 | 75 | 31 | 32 | M8x1.0mm | WD104 |
| CBT30-HC12-85 | | 12 | 32 | 44.5 | 85 | 40 | 37 | M10x1.0mm | WD106 |
| CBT30-HC14-85 | | 14 | 34 | 44.5 | 85 | 40 | 37 | M12x1.0mm | WD108 |
| CBT30-HC16-90 | | 16 | 38 | 44.5 | 90 | 46 | 42 | M16x1.0mm | WD110 |
| CBT30-HC18-90 | | 18 | 40 | 44.5 | 90 | 46 | 42 | M12x1.0mm | WD112 |
| CBT30-HC20-90 | | 20 | 42 | 44.5 | 90 | 48 | 42 | M16x1.0mm | WD114 |
| CBT40-HC6-90 | 40 | 6 | 26 | 49.5 | 90 | 30 | 27 | M5x0.8mm | WE100 |
| CBT40-HC8-90 | | 8 | 28 | 49.5 | 90 | 30 | 27 | M6x1.0mm | WE102 |
| CBT40-HC10-90 | | 10 | 30 | 49.5 | 90 | 32 | 32 | M8x1.0mm | WE104 |
| CBT40-HC12-90 | | 12 | 32 | 49.5 | 90 | 35 | 37 | M10x1.0mm | WE106 |
| CBT40-HC14-90 | | 14 | 34 | 49.5 | 90 | 35 | 37 | M10x1.0mm | WE108 |
| CBT40-HC16-90 | | 16 | 38 | 49.5 | 90 | 40 | 42 | M10x1.0mm | WE110 |
| CBT40-HC18-90 | | 18 | 40 | 49.5 | 90 | 40 | 42 | M16x1.0mm | WE112 |
| CBT40-HC20-90 | | 20 | 42 | 49.5 | 90 | 40 | 42 | M16x1.0mm | WE114 |
| CBT40-HC25-100 | | 25 | 50 | 60 | 100 | 45 | 48 | M10x1.0mm | WE116 |
| CBT40-HC32-105 | | 32 | 60 | 60 | 105 | 50 | 55 | M16x1.0mm | WE118 |
|
|
 |
|
